Plumbing and pipefitting: the work, the crew, how to get on
Updated
The Good
Plumbers and pipefitters keep water, gas and steam moving where it belongs. A clean joint that holds is a quiet kind of pride.
- Plumbers, pipefitters and steamfitters install and repair piping fixtures and systems. 3
The work keeps coming: BLS projects employment to grow 6.8% from 2025 to 2035, with about 42,000 openings a year 2
If you served
Military jobs that map here 5
- Army MOS: 12K Plumber
- Navy rating: UT Utilitiesman; HT Hull Maintenance Technician
- Air Force AFSC: 3E4X1 Water and Fuel Systems Maintenance
- Marine Corps MOS: 1171 Water Support Technician
- Coast Guard rating: MK Machinery Technician; DC Damage Controlman
Is it for you?
You fit if you can crawl under a house without a fuss, talk straight to a worried homeowner and take pride in a joint nobody will ever see. A strong stomach helps on service calls, and so does a truck that starts on a cold morning when a family has no water.
A day on the crew
A typical day as crews describe it. Every outfit runs its own way.
- The day opens at the truck or the shop, loading fittings, pipe and the right tools for the job.
- New work means rough-in: drains, vents and supply lines run through framing before the walls close.
- Service work means a homeowner, a problem and a crawlspace. You find the leak or the clog and fix it right.
- Every new system gets a pressure test before the inspector shows up.
- End of day: trash out, floors wiped and the customer told plainly what was done.
Clean water in and waste out is how families stay healthy, and a plumber can see that in every job he finishes.
The Brutal
Trenches, crawlspaces, wet floors and cast iron heavier than it looks. A bad joint leaks, and the leak has your name on it.
- Common injuries include cuts from sharp tools, burns from hot pipes and soldering equipment, and falls from ladders. 3
- Most work full time including nights and weekends, and are often on call for emergencies. 3
Crew safety talks for this trade: trenching · silica dust. Free, with a printable sign-in sheet.
Greenhorn mistakes
- Skipping the reamer, so the joint leaks a week later.
- Running drain pipe without enough slope.
- Not testing before the drywall goes up.
Hard lessons
Every plumber has a leak with his name on it. You go back, you own it, you fix it at no charge if it was your fault. Customers remember the man who came back far longer than the one who never made a mistake.
The Paycheck
The spread: 10% of plumbers, pipefitters, and steamfitters earned under $44,150, 10% over $108,420 1 BLS does not publish starting pay, overtime or per diem, so neither do we. Get the rate and travel terms in writing.
U.S. pay, BLS OEWS May 2025 national estimatesOccupation · Median. Tap a row for the rest.
Plumbers, pipefitters, and steamfitters$63,800 ($30.67/hr)
- Median
- $63,800 ($30.67/hr)
- Bottom 10%
- $44,150
- Top 10%
- $108,420
- Jobs
- 465,840
- Code
- SOC 47-2152
Base wages 1
Where the pay runs highest
Top five states by median wage, BLS OEWS May 2025State · Median · vs U.S. median. Tap a row for the rest.
District of Columbia$101,020 · +58%
- Median
- $101,020
- vs U.S. median
- +58%
- Jobs
- 1,010
Illinois$99,950 · +57%
- Median
- $99,950
- vs U.S. median
- +57%
- Jobs
- 16,750
Oregon$97,050 · +52%
- Median
- $97,050
- vs U.S. median
- +52%
- Jobs
- 5,370
Minnesota$94,410 · +48%
- Median
- $94,410
- vs U.S. median
- +48%
- Jobs
- 10,720
Alaska$93,920 · +47%
- Median
- $93,920
- vs U.S. median
- +47%
- Jobs
- 1,200
Of 51 ranked 1
How to Get In
Ask plumbing shops for a helper spot, and ask the local union hall or contractor association how their apprenticeship applications work.
Crews hire who they know. Here is how to get known and get hired.
What the foreman wants to see
- Your joints hold on the first test.
- You treat the customer's house like your mother's house.
- You learn the code book, not just the shortcuts.
Before Monday, ask what the job needs: a license or permit, a safety card or site orientation, a drug screen. Gear: the Day One checklist.
- A high school diploma or equivalent is typically required, and most learn through a 4- or 5-year apprenticeship. 3
- Most states and some localities require plumbers to be licensed. 3
Apprenticeship sponsors
DOL lists 2,944 sponsors matched to this trade by name, most in New Jersey 410, Indiana 282, Connecticut 263, Montana 244, Rhode Island 225. A place to start calling, not a job count 8
The path to owning your own outfit
Owning a plumbing shop usually requires a contractor or master plumber license from your state. The steps for one state we sourced are below, and the general steps are on the crew to owner page. BLS puts the self-employed share of plumbers, pipefitters, and steamfitters at 8% in 2025 6. The full steps are on crew to owner.
- Iowa law requires plumbing and mechanical contractors to be licensed with the state board and registered with DIAL. 7
Where the build is
Generators under construction and planned, by state (EIA-860M, Sept 2026)State · Building. Tap a row for the rest.
TX4,046 MW
- Units building
- 18
- Building
- 4,046 MW
- Units planned
- 171
- Planned
- 19,845 MW
MS1,655 MW
- Units building
- 6
- Building
- 1,655 MW
- Units planned
- 16
- Planned
- 1,358 MW
KY815 MW
- Units building
- 5
- Building
- 815 MW
- Units planned
- 24
- Planned
- 223 MW
TN778 MW
- Units building
- 2
- Building
- 778 MW
- Units planned
- 20
- Planned
- 2,608 MW
AZ689 MW
- Units building
- 14
- Building
- 689 MW
- Units planned
- 9
- Planned
- 1,692 MW
Jobsite words
- Top out
- The stage when drain, vent and supply pipe are in the walls before cover.
- Sweat a joint
- Solder a copper joint with a torch.
- Cleanout
- An access point for clearing a drain line.
- Dope
- Pipe joint compound used on threads.
More in the jobsite words glossary.
Questions people ask
How many people work as plumbers, pipefitters, and steamfitters?
BLS OEWS counted 465,840 in May 2025 (data released May 15, 2026).
What training does it take?
BLS lists the typical entry education as high school diploma or equivalent and the typical training as apprenticeship (Employment Projections 2025-35).
How much do plumbers, pipefitters, and steamfitters make?
BLS OEWS reported a May 2025 median of $63,800 a year, or $30.67 an hour, with the bottom 10% at $44,150 and the top 10% at $108,420 (data released May 15, 2026).
What do greenhorns get wrong?
Skipping the reamer, so the joint leaks a week later. Running drain pipe without enough slope. Not testing before the drywall goes up. Your joints hold on the first test.
Running a plumbing and pipefitting crew?
Featured hiring spots open soon; seekers apply straight to you.
Tell us you are hiringOther trades
Sources
- BLS OEWS, May 2025 data, released May 15, 2026
- BLS Employment Projections 2025-35, 2025-35 projections
- BLS Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters, page dated Oct 29, 2026
- BLS OEWS, May 2025: national mean and 90th percentile annual wage, May 2025 data, released May 15, 2026
- O*NET OnLine Military Crosswalk, vintage Oct 30, 2026
- BLS Employment Projections Table 1.2, percent self-employed, 2025 data
- Iowa Division of Labor/DIAL, Plumbing Contractor License, checked Nov 19, 2026
- U.S. DOL Office of Apprenticeship partner sponsors, trades-core release Nov 4, 2026
- EIA Form EIA-860M, September 2026 inventory, released Oct 23, 2026
- Technology-to-trade mapping, Tough and Dirty (editorial, not an EIA or BLS product), Nov 2026
Estimates, not promises. Rules change; check with the employer and the agency.
Photos: Pipefitters preparing pipe, PEO ACWA, CC BY 2.0. All photo credits.
