Plant and machinery

Millwright: the work, the crew, how to get on

Updated

About 40,330 millwrights work this trade in the U.S. 1. The typical entry education is high school diploma or equivalent, and the typical training is apprenticeship 2

Navy machinist in hearing protection repairing a leaking pump in an engine room

The Good

Millwrights set and align the heavy machines every plant runs on. Nobody notices the work until it is done wrong.

  • Millwrights install, dismantle or move machinery and heavy equipment following layout plans and blueprints. 3

The work keeps coming: BLS projects employment to grow 0.9% from 2025 to 2035, with about 3,200 openings a year 2

Is it for you?

You fit if you like big machines, precise measurement and slow, careful work. Plant shutdowns mean long shifts, and a good millwright never gets careless at the end of one.

A day on the crew

A typical day as crews describe it. Every outfit runs its own way.

  1. The day begins with the work order and lockout. No one touches a machine until it is locked and tried.
  2. Rigging and moving heavy parts with hoists, cribbing and careful hands.
  3. Setting and leveling: shims, bolts and a lot of checking.
  4. Alignment with a dial indicator or laser until the readings are right.
  5. Test run, paperwork and handing the machine back to operations.

Plants run on the machines millwrights set, and those plants are where a lot of neighbors earn their living.

The Brutal

Cramped machine pits, heavy parts and a clock running whenever the plant is down. A turnaround means long shifts to get the unit back online.

  • 59% report daily exposure to hazardous equipment and 33% report minor burns, cuts, bites or stings daily. 3
  • 82% report working more than 40 hours in a typical week. 3

Crew safety talks for this trade: electrical and lockout · lifting and carrying. Free, with a printable sign-in sheet.

Greenhorn mistakes

  • Skipping lockout because the job is quick.
  • Missing soft foot and chasing alignment for hours.
  • Losing small parts and fasteners on a teardown.

Hard lessons

Every millwright has chased an alignment all shift only to find he missed the basics. The good ones learn to slow down at the start. Patience at the setup saves the whole crew a long night.

The Paycheck

The spread: 10% of millwrights earned under $46,290, 10% over $93,600 1 BLS does not publish starting pay, overtime or per diem, so neither do we. Get the rate and travel terms in writing.

U.S. pay, BLS OEWS May 2025 national estimatesOccupation · Median. Tap a row for the rest.

Millwrights$65,700 ($31.59/hr)
Median
$65,700 ($31.59/hr)
Bottom 10%
$46,290
Top 10%
$93,600
Jobs
40,330
Code
SOC 49-9044

Base wages 1

Where the pay runs highest

Top five states by median wage, BLS OEWS May 2025State · Median · vs U.S. median. Tap a row for the rest.

New Jersey$107,540 · +64%
Median
$107,540
vs U.S. median
+64%
Jobs
340
New Mexico$90,230 · +37%
Median
$90,230
vs U.S. median
+37%
Jobs
60
Michigan$89,190 · +36%
Median
$89,190
vs U.S. median
+36%
Jobs
2,900
Wisconsin$82,630 · +26%
Median
$82,630
vs U.S. median
+26%
Jobs
1,220
Colorado$81,440 · +24%
Median
$81,440
vs U.S. median
+24%
Jobs
200

Of 48 ranked 1

How to Get In

Plants hire extra hands for turnarounds. Ask the maintenance supervisor how they bring people on.

Crews hire who they know. Here is how to get known and get hired.

What the foreman wants to see

  • You lock out every time without being reminded.
  • You take your readings carefully and write them down.
  • Parts are bagged and labeled on every teardown.

Before Monday, ask what the job needs: a license or permit, a safety card or site orientation, a drug screen. Gear: the Day One checklist.

  • Job Zone 1-2 with on-the-job training from a few days to a year; Millwright is a listed registered apprenticeship title. 3

Apprenticeship sponsors

DOL lists 30 sponsors matched to this trade by name, most in Michigan 4, Texas 3, Iowa 2, Louisiana 2, Massachusetts 2. A place to start calling, not a job count 5

The path to owning your own outfit

Some millwrights start contracting for plant outages or machinery moves. It takes rigging gear, insurance and a name plants trust. The full steps are on crew to owner.

Where the build is

Generators under construction and planned, by state (EIA-860M, Sept 2026)State · Building. Tap a row for the rest.

TX5,417 MW
Units building
24
Building
5,417 MW
Units planned
182
Planned
22,699 MW
WY3,550 MW
Units building
4
Building
3,550 MW
Units planned
6
Planned
1,130 MW
VA2,640 MW
Units building
1
Building
2,640 MW
Units planned
4
Planned
1,000 MW
NY2,109 MW
Units building
11
Building
2,109 MW
Units planned
6
Planned
506 MW
MS1,655 MW
Units building
6
Building
1,655 MW
Units planned
16
Planned
1,358 MW

States with the most generating capacity under construction in the plant types we match to this trade 7 6

Generators only; "planned" means not yet building.

Jobsite words

Soft foot
A machine foot that does not sit flat, which throws off alignment.
Shim
Thin metal used to level or align a machine.
Dial indicator
A gauge that measures small movement during alignment.
Lockout
Locking out energy sources before work starts.

More in the jobsite words glossary.

Questions people ask

How many people work as millwrights?

BLS OEWS counted 40,330 in May 2025 (data released May 15, 2026).

What training does it take?

BLS lists the typical entry education as high school diploma or equivalent and the typical training as apprenticeship (Employment Projections 2025-35).

How much do millwrights make?

BLS OEWS reported a May 2025 median of $65,700 a year, or $31.59 an hour, with the bottom 10% at $46,290 and the top 10% at $93,600 (data released May 15, 2026).

What do greenhorns get wrong?

Skipping lockout because the job is quick. Missing soft foot and chasing alignment for hours. Losing small parts and fasteners on a teardown. You lock out every time without being reminded.

Running a millwright crew?

Featured hiring spots open soon; seekers apply straight to you.

Tell us you are hiring

Other trades

Sources

  1. BLS OEWS, May 2025 data, released May 15, 2026
  2. BLS Employment Projections 2025-35, 2025-35 projections
  3. O*NET OnLine: Millwrights, page dated Oct 6, 2026
  4. BLS OEWS, May 2025: national mean and 90th percentile annual wage, May 2025 data, released May 15, 2026
  5. U.S. DOL Office of Apprenticeship partner sponsors, trades-core release Nov 4, 2026
  6. EIA Form EIA-860M, September 2026 inventory, released Oct 23, 2026
  7. Technology-to-trade mapping, Tough and Dirty (editorial, not an EIA or BLS product), Nov 2026

Estimates, not promises. Rules change; check with the employer and the agency.

Photos: Navy machinist repairing a pump, U.S. Navy photo by Mass Communication Specialist 3rd Class Jonathan Pankau, Public domain. All photo credits.