5-minute toolbox talk

Struck-by: vehicles, swing radius and falling objects

Updated

Why it matters: Moving equipment, swinging buckets, trucks near the road, and anything dropped from above can hit you before you see it coming. Most of it comes down to where you stand.1

Struck-by: vehicles, swing radius and falling objects

Before you start

Do this talk next to the running equipment, with the operators there, so everyone can see the swing radius and blind spots. Read the key points out loud, then let the crew answer the questions. It takes about five minutes.

Key points

  • Stay out of the swing radius of excavators and backhoes, and never walk between swinging equipment and a wall.
  • Make eye contact with the operator before you walk near a machine. If you cannot see the operator, the operator cannot see you.
  • Near traffic, wear red or orange warning vests, and reflective ones at night.
  • Wear a hard hat wherever things can fall, and stack materials so they cannot slide or tip.
  • Use toeboards, debris nets or canopies where work is going on overhead.
  • Wear eye protection when tools throw particles, and check that saw guards are in good shape.

On your crew

  • Heavy equipment: Excavators and loaders swing and back up constantly. Barricade the swing radius, and do not walk behind a machine until the operator has seen you and stopped.
  • Pipeline and pipelayers: Side booms, pipe trucks and suspended joints of pipe mean loads moving overhead. Stay out from under a load, and use tag lines instead of hands to guide it.
  • Waste hauling: Riding steps, backing trucks and traffic are part of every route. Be seen in hi-vis, stay out of the backing path, and never step behind a truck that is moving.
  • Oilfield: Pipe handling, high-pressure lines and trucks on location are struck-by hazards. Stay clear of the line of fire whenever pressure is being tested or released.

Talk it over

  1. Where are the blind spots for the equipment running on this job today?
  2. Who is working overhead today, and what keeps their tools and material from falling on us?

On the job

One OSHA case report: a worker walked toward a backhoe from the operator's blind side, between the machine and a concrete wall. The swinging superstructure crushed him. There was no barricade, and the crew had not been trained.1

Free printable sign-in sheet

Fill in the top on your phone or by hand, then print. The talk prints first, and the sign-in sheet starts on its own page.

Toolbox talk sign-in sheet

#Printed nameSignature
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

By signing, each worker confirms they attended this talk. Keep this sheet with your job records.

A fresh talk for your crew

Founding employers on the Tough and Dirty crew board get a new toolbox talk every Monday, with the sign-in sheet ready to print.

Get a new talk every Monday in your crew dashboard

Next talk

Electrical and lockout: kill it, lock it, prove it · All 12 toolbox talks

Sources

  1. OSHA Construction eTool: Struck-By Hazards, checked Nov 19, 2026

Estimates, not promises. Rules change; check with the employer and the agency.